A shot of Dave ( @jabbasalesman ) Escobar’s @sundaybikes all built up with a custom IDC-26R integrated dust cap, counterbored stem & FCC-24P compression cap.

Dave Escobar ( @jabbasalesman ) came over this evening to hang out and have some work done. Replaced his IDC-05R and load of spacers with a custom IDC-26R.

IDC-26R - Integrated Dust Cap 26mm Raw

@StolenBikeCo TLCStem counterbored and topped off with one of our FCC-24B compression caps.

nativebikes:

just some close ups of our Trendkill frame available in the web store.  Support America!

nativebikes:

Here you have a custom 1911 pistol holster i made for Ken Spaulding of Zodiac Engineering for his new gun/tool company called NME

Crenellated @4Sevens titanium Preon clicky tail caps.

Titanium clicky cover was removed, retaining ring faced flush with the rubber boot, chamfered on the ID and finished off with crenellation for thumb clearance.

@4Sevens Titanium Preon tailcap mod.

Stock clicky is on the left. Modified on the right. This modification consists of removing the titanium cover, facing the retaining ring and adding a large chamfer on the ID to allow clearance for your thumb.

Benefits to this modification are the allowance of standing on end to use as a candle and ridding the accidental depression of the clicky while inserting in your pocket.

SDS-30R up against the new mill and freshly milled Sprocket Tooling Plate. Some more holes to go, but these will help hold the first run of sprockets being modified to Socket Drive.

Its alive!!!

SDS-30T off to England!